The OEM flexographic plate supply is one of the world’s leading manufacturers in digital and conventional formats, these products can compete with the top brands you ever used before, yet at an affordable price.
In the corrugated industry, typically there are two types of applications, one is the corrugated board printing which uses plates in thickness from 2.84mm to 7.0mm, and the other one is pre-print liner which uses plates in thickness as thin as 1.14mm. These flexographic printing plates are compatible with all Water-based and Alcohol-based inks, and certain UV, yet we urge you to test before using for specific application of Solvent-based inks.
The most general sizes available are:
- 2032mm * 1270mm
- 2032mm * 1067mm
- 1524mm * 1067mm
- 1016mm * 762mm
We can supply both Digital Plates and conventional Analogue Plates, plus plate making equipment from Exposure, Wash-out, Dyer Drawer to Solvent Recycle, you can view more about all of these items on our website for your total print requirements.
Specification of print plates typically for corrugated sheet | |||||||
Type | DR635LD | DR550LD | DR470LD | DR394-I | DR394LD | DR318LD | DR284- || |
Thickness/mm | 6.35 | 5.50 | 4.70 | 3.94 | 3.94 | 3.18 | 2.84 |
Hardness/ShoreA | 36-38 | 36-38 | 36-38 | 43-45 | 38-40 | 40-42 | 46-48 |
ReliefDeepth/mm | 2.2-3.0 | 2.0-3.0 | 1.8-2.4 | 1.8-2.0 | 1.8-2.0 | 0.9-1.5 | 1.0-1.4 |
Dot reproduction/% | 3-98 | 3-98 | 3-98 | 2-98 | 2-98 | 2-98 | 2-98 |
Line/lpi | 85 | 85 | 85 | 100 | 100 | 100 | 120 |
Isolated Line/Down to mm | 0.3 | 0.3 | 0.3 | 0.2 | 0.2 | 0.175 | 0.175 |
Isolated Dot/Down to mm | 0.5 | 0.5 | 0.5 | 0.4 | 0.4 | 0.25 | 0.25 |
Back Exposure/s Ultraviolet Rays365nm, 16-22mw/cm2;24-30℃ |
160–320 | 100-220 | 80-200 | 35-60 | 40–80 | 30-60 | 25-40 |
Main Exposure/min Ultraviolet Ravs 365nm, 16-22mw/cm²;24-30℃ |
12–24 | 12–20 | 12–20 | 12–20 | 12–20 | 10–20 | 8–20 |
Rinsing/min | 10–12 | 9–12 | 9–12 | 5–8 | 5–8 | 5–7 | 5–7 |
Drying/h | 3–4 | 3–3.5 | 2–3 | 1.5-2 | 1.5-2 | 1.5–2 | 1.5-2 |
Detackifing/min(UV-C) | 5–8 | 5–8 | 5–8 | 5–8 | 5–8 | 5–8 | 5–8 |
Post Exposure/min(UV-A) Ultraviolet Rays 365nm, 16-22mw/cm2;24-30℃ |
5 | 5 | 5 | 5–8 | 5 | 5 | 5–8 |
Specification of print plates typically for corrugated sheet | ||||||||
Type | DR284LD | DR284M-II | DR254-I | DR228LS | DR170LS | DR170M | DR170H | DR114H |
Thickness/mm | 2.84 | 2.84 | 2.54 | 2.28 | 1.70 | 1.70 | 1.70 | 1.14 |
Hardness/ShoreA | 40-42 | 52-54 | 54-56 | 56-58 | 62-64 | 66-68 | 70-72 | 74-76 |
ReliefDeepth/mm | 1.0-1.4 | 1.0-1.4 | 1.0-1.2 | 1.0-1.2 | 0.7-0.9 | 0.7-0.9 | 0.7-0.9 | 0.6-0.7 |
Dot reproduction/% | 2-98 | 2-98 | 2-98 | 2-98 | 1-98 | 1-98 | 1-98 | 1-98 |
Line/lpi | 120 | 120 | 133 | 133 | 150 | 150 | 150 | 150 |
Isolated Line/Down to mm | 0.175 | 0.175 | 0.15 | 0.15 | 0.1 | 0.1 | 0.1 | 0.1 |
Isolated Dot/Down to mm | 0.25 | 0.25 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 |
Back Exposure/s Ultraviolet Rays365nm, 16-22mw/cm2;24-30℃ |
30-60 | 25-40 | 25-40 | 35-55 | 25-40 | 15-21 | 15-21 | 35-70 |
Main Exposure/min Ultraviolet Ravs 365nm, 16-22mw/cm²;24-30℃ |
10–20 | 8–20 | 8–15 | 8–20 | 10–18 | 10–18 | 10–18 | 10–18 |
Rinsing/min | 5–7 | 5–7 | 5–7 | 5–7 | 5–7 | 5–7 | 5–7 | 5–7 |
Drying/h | 1. 5-2 | 1.5-2 | 1.5-2 | 1.5-2 | 1.5-2 | 1.5-2 | 1.5-2 | 1.5-2 |
Detackifing/min(UV-C) | 5–8 | 5–7 | 5–8 | 5–7 | 5–8 | 5–8 | 5–8 | 5–8 |
Post Exposure/min(UV-A) Ultraviolet Rays 365nm, 16-22mw/cm2;24-30℃ |
5 | 4–6 | 4–6 | 4–6 | 4–6 | 4–6 | 4–6 | 4–6 |
The hardness contrast table of digital flexo products | |||||||||
Huaguang | DR394- IIl | DR394-II | DR318L | DR284-I1 | DR254-I1 | DR170LS | DR170H | DR114LS | DR114H |
hardness ( Shore A) | 38-36 | 43-45 | 37-39 | 45-48 | 56 | 60-62 | 70-72 | 69-72 | 75-76 |
DuPont Cyrel | DS2 67 DPU67 | DPR67 NOWS67 | DS2 45 | DPR45 NOWS45 | |||||
Flint Nyloflex | FAC- DII125 | ACT-DII 067 | ACE-DII067 FAH-DII067 | ACT-DII045 | AC E-DIIO45 FAH-DII045 | ||||
/ Asahi AFP | DSF2.54 | DSF1.7 | DSH1.7 | DSF1.14 | DSH1.14 | ||||
MacDermid | Digital MVP 67 | Digital MAX 67 | Digital MVP 45 | Digital MAX 45 |